YASIN TELECOM BD: July 2017

More than 1000 phones unlocked in 24 hours Extremely Easy Super Fast Very Safe নিজের নামে সল্পমুল্যে ওয়েবসাইট বানাতে বা ডিজাইন করতে যোগাযোগ করুন 01823527525 সকল বড় ভাইদের জন্য একটি দারুন সুখবর সকলের অবগতির জন্য জানানো যাচ্ছে যে , আমাদের সার্ভিস যদি আপনাদের ভালো লেগে থাকে তাহলে আপনি আমাদের একজন সদস্য হতে পারেন । আমরা আপনার সকল প্রকার সাপোর্ট দিতে সর্বদা নিয়োজিত থাকব । আপনি আমাদের একজন সদস্য হতে চাইলে আপনি আমাদের সাথে যোগাযোগ করতে পারেনএই সাইটটির প্রতিটি ফাইল আমরা নিজেরা টেস্ট করে থাকি এবং শতভাগ নিশ্চিত হওয়ার পর আপলোড করে থাকি। তার পরও যদি আমাদের কোন ফাইলে সমস্যা দেখা দেয়, তাহলে বিষয়টি কর্তৃপক্ষকে জানানোর জন্য বিশেষভাবে অনুরোধ করছি। আমরা চেষ্টা করব আপনাদের ভাল কিছু দেওয়ার। ধন্যবাদ।+8801823527525 Your Need any Kind of Mobile Software and Mobile Problem Just Contact Us Name: Gsm yasin whatsapp imo 01823527525 Mobile No.: 01823527525 Email:- mdyasin7026@gmail.com mdyasin7026@gmail.com We are also make website any kind of website design and any kind of SEO work doing here Just Contact This Number:01823527525 Name:gsm yasin Mobile No:-01823527525 Eamil :- mdyasin7026@gmail.com

Friday, July 28, 2017

CROWN 3G B751 FLASH FILE MTKxCPU : MT6582 AndroidVer: 4.2.2 CM2 READ Firmware

Reading Flash Content now ...

Brand     : CROWNM
ProdName : B751
ProdModel : B751
Device    : B751
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : surplus

[Read Ok] : preloader_k8_lc_13.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / k8_lc_13 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 969 MiB
Scatter saved to : C:\Users\YASIN TELECOM BD\Desktop\MT6582__CROWNM__B751__B751__4.2.2__surplus\

All done!

Done!
Elapsed: 00:05:38
Reconnect Power/Cable!

ZTE Blade Q1 FLASH FILE MTKxCPU : MT6572 AndroidVer: 4.4.2 CM2 READ Firmware

Reading Flash Content now ...

Brand     : ZTE
ProdName : P172R10
ProdModel : ZTE Blade Q1
Device    : P172R10
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : TLN_MY_QB18DX_P172R10V1.0.3

[Read Ok] : preloader_ztenj72_we_72_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / ztenj72_we_72_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1035 MiB
Scatter saved to : C:\Users\YASIN TELECOM BD\Desktop\New folder\MT6572__ZTE__ZTE_Blade_Q1__P172R10__4.4.2__TLN_MY_QB18DX_P172R10V1.0.3\

All done!

Done!
Elapsed: 00:05:09
Reconnect Power/Cable!

Wednesday, July 19, 2017

dotNetFx45_Full_setup

Friday, July 14, 2017

SAMSUNG A9 COPY FLASH FILE MTKxCPU : MT6580 AndroidVer: 5.1 CM2 READ Firmware

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : alps
ProdName : full_gxq6580_weg_l
ProdModel : gxq6580_we_l
Device    : gxq6580_weg_l
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69

[Read Ok] : preloader_gxq6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / gxq6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1119 MiB
Scatter saved to : C:\Users\YASIN TELECOM BD\Desktop\Firmware\MT6580__alps__gxq6580_we_l__gxq6580_weg_l__5.1__ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69\

All done!

Done!
Elapsed: 00:05:47
Reconnect Power/Cable!

Thursday, July 6, 2017

WIKO LENNY Flash File MT6572 AndroidVer 4.4.2 Cm2 Read FIRMWER

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473261110166963ACB9281
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A4834473261110166963ACB9281
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x6393F49185969FF3DC6821A40C80B407
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : WIKO
ProdName : s5201ap
ProdModel : LENNY
Device    : s5201ap
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

MODEM :
BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_1_wg_n

EXTRA :
LCD [0] : ili9806e_fwvga_dsi_vdo_txd
LCD [1] : hx8379c_fwvga_dsi_vdo_tcl
LCD [2] : ili9806e_fwvga_dsi_vdo_dj
LCD [3] : ili9806e_fwvga_dsi_vdo_glass
LCD [4] : ili9806e_fwvga_dsi_vdo_djnew
LCD Res : 854x480
TOUCH [0] : GT9XX
CAM [0] : ov5645_mipi_yuv
CAM [1] : ov5646_mipi_yuv
CAM [2] : sp0a19_yuv
CAM [3] : gc0329_yuv
CAM [4] : hi258_mipi_yuv
MODEM : mt6572_s5201ae_wiko_hspa_gemini
LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG th_TH pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB ur_PK fa_IR hdpi -sw600dp -sw720dp

Done!
Elapsed: 00:00:11
Reconnect Power/Cable!

Wednesday, July 5, 2017

Micromax Q354 FLASH FILE MTKxCPU : MT6580 AndroidVer: 6.0 CM2 READ Firmware

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Micromax
ProdName : Q354
ProdModel : Micromax Q354
Device    : Q354
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_esky6580.we.c.m_P19

[Read Ok] : preloader_esky6580_we_c_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / esky6580_we_c_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2076 MiB
Scatter saved to : C:\Users\YASIN TELECOM BD\Desktop\Firmware\MT6580__Micromax__Micromax_Q354__Q354__6.0__alps-mp-m0.mp1-V2.34_esky6580.we.c.m_P19\

All done!

Done!
Elapsed: 00:13:28
Reconnect Power/Cable!

Monday, July 3, 2017

ZELTA Q50 FLASH FILE CP0 sc7731g AndrVersion : 5.1 CM2 READ Firmware

Model Name : Q50+
Model Brand : SPRD
Model Device: scx20_c7316_wvga
AndrVersion : 5.1
BaseBand CPU: C7316_WVGA
Project Ver : Q50+_2_XXX_1.0_1.0_21102016
Model Ext : Q50+

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1871 MiB
Saved to : C:\Users\YASIN TELECOM BD\Desktop\Firmware\C7316_WVGA_scx20_c7316_wvga_5.1_Q50+_2_XXX_1.0_1.0_21102016_Q50+\
Done!

Elapsed: 00:14:07

Reconnect Power/Cable!